New Titleist GT driver and fairway private outdoor fitting special
Read More
New Titleist GT driver and fairway private outdoor fitting special
Read More

Check out our Golf Club Fitting Packages -  View Package Options →

Hodson Golf

Accra Concept Series Driver Shaft – Just Arrived!!!!!

Read Article
Share This Post

Use the best materials, manufacture them to the tightest standards in the industry, test and prove their quality with an industry first (s3) and then sit back and watch everyone hit it straighter and farther – what a CONCEPT!!!!

This shaft is the real deal people!!! Every shaft manufacturer has been trying to master the high launch low spin shaft for years – but at a sacrifice to tip stability and control. This  one is a game changer and pairs well w/ the low spin heads that I specialize in.

From Accra:
Every few years a true innovation is introduced that significantly benefits golfers by providing the perfect combination of shaft/club head/ball.  The ACCRA CS1 does just this when combined with the new super low spin woods and balls. ACCRA has always featured super high modulus composite materials, the CS1 takes this to a new level with a greater concentration of composite versus resin content than ever before and more super high modulus graphite than ever before. We have developed a shaft that encompasses the greatest attributes of the Tour Z ST and the Tour Z CB.
A responsive tip section combined with lower torque and a higher CG make for the perfect shaft for the newest driver heads that all promote super low spin rates.  Golfers are going to require a shaft that has great stability and gives a discerning golfer the ability to launch the ball higher, which the CSI will do. The new CS1, has all the stability of the Tour Z ST series allows for more control of launch. The higher CG also enables the world’s best club fitters to fit the CS1 into any of the new, heavier, driver heads and manipulate swing weight easily.
Using the new S3 shaft profiling machine, ACCRA has developed a shaft to specific specifications in order to maximize shaft performance using the latest technology in heads and golf balls. Our new manufacturing facility in Japan enables ACCRA to meet tighter tolerances than ever before.   ACCRA is extremely excited about this new line of shafts that far exceeds performance and quality standards than we have ever reached previously.
Whether a golfer is a Tour caliber player or a weekend warrior, the ACCRA CS1 can be custom fit to your specific swing characteristics by a professional club fitter to maximize their launch conditions.

 

Andrew Hodson

Andrew is proud to sit on the National Fitters Board with Callaway Golf and has been proudly designated as one of the top 100 fitting centers by Golf Digest ever since this prestigious designation began back in 2010.

Follow us on FacebookFollow us on InstagramFollow us on X

Newsletter Sign Up

Stay notified of the latest releases, promos, golf news, and more straight to your inbox regularly.

We don’t spam! Read our privacy statement for more info.

Your information is protected by us. Read our privacy policy

Let's get started!

We would love to help get you set up with the best equipment tailored for you.

Accra Concept Series Driver Shaft – Just Arrived!!!!!

Andrew Hodson
Author Position

Use the best materials, manufacture them to the tightest standards in the industry, test and…

Use the best materials, manufacture them to the tightest standards in the industry, test and prove their quality with an industry first (s3) and then sit back and watch everyone hit it straighter and farther – what a CONCEPT!!!!

This shaft is the real deal people!!! Every shaft manufacturer has been trying to master the high launch low spin shaft for years – but at a sacrifice to tip stability and control. This  one is a game changer and pairs well w/ the low spin heads that I specialize in.

From Accra:
Every few years a true innovation is introduced that significantly benefits golfers by providing the perfect combination of shaft/club head/ball.  The ACCRA CS1 does just this when combined with the new super low spin woods and balls. ACCRA has always featured super high modulus composite materials, the CS1 takes this to a new level with a greater concentration of composite versus resin content than ever before and more super high modulus graphite than ever before. We have developed a shaft that encompasses the greatest attributes of the Tour Z ST and the Tour Z CB.
A responsive tip section combined with lower torque and a higher CG make for the perfect shaft for the newest driver heads that all promote super low spin rates.  Golfers are going to require a shaft that has great stability and gives a discerning golfer the ability to launch the ball higher, which the CSI will do. The new CS1, has all the stability of the Tour Z ST series allows for more control of launch. The higher CG also enables the world’s best club fitters to fit the CS1 into any of the new, heavier, driver heads and manipulate swing weight easily.
Using the new S3 shaft profiling machine, ACCRA has developed a shaft to specific specifications in order to maximize shaft performance using the latest technology in heads and golf balls. Our new manufacturing facility in Japan enables ACCRA to meet tighter tolerances than ever before.   ACCRA is extremely excited about this new line of shafts that far exceeds performance and quality standards than we have ever reached previously.
Whether a golfer is a Tour caliber player or a weekend warrior, the ACCRA CS1 can be custom fit to your specific swing characteristics by a professional club fitter to maximize their launch conditions.

 

Andrew Hodson

Andrew is proud to sit on the National Fitters Board with Callaway Golf and has been proudly designated as one of the top 100 fitting centers by Golf Digest ever since this prestigious designation began back in 2010.

Newsletter Sign Up

Stay notified of the latest releases, promos, golf news, and more straight to your inbox regularly.

We don’t spam! Read our privacy statement for more info.

Your information is protected by us. Read our privacy policy

Let's get started!

We would love to help get you set up with the best equipment tailored for you.

Accra Concept Series Driver Shaft – Just Arrived!!!!!

Read Article

Use the best materials, manufacture them to the tightest standards in the industry, test and prove their quality with an industry first (s3) and then sit back and watch everyone hit it straighter and farther – what a CONCEPT!!!!

This shaft is the real deal people!!! Every shaft manufacturer has been trying to master the high launch low spin shaft for years – but at a sacrifice to tip stability and control. This  one is a game changer and pairs well w/ the low spin heads that I specialize in.

From Accra:
Every few years a true innovation is introduced that significantly benefits golfers by providing the perfect combination of shaft/club head/ball.  The ACCRA CS1 does just this when combined with the new super low spin woods and balls. ACCRA has always featured super high modulus composite materials, the CS1 takes this to a new level with a greater concentration of composite versus resin content than ever before and more super high modulus graphite than ever before. We have developed a shaft that encompasses the greatest attributes of the Tour Z ST and the Tour Z CB.
A responsive tip section combined with lower torque and a higher CG make for the perfect shaft for the newest driver heads that all promote super low spin rates.  Golfers are going to require a shaft that has great stability and gives a discerning golfer the ability to launch the ball higher, which the CSI will do. The new CS1, has all the stability of the Tour Z ST series allows for more control of launch. The higher CG also enables the world’s best club fitters to fit the CS1 into any of the new, heavier, driver heads and manipulate swing weight easily.
Using the new S3 shaft profiling machine, ACCRA has developed a shaft to specific specifications in order to maximize shaft performance using the latest technology in heads and golf balls. Our new manufacturing facility in Japan enables ACCRA to meet tighter tolerances than ever before.   ACCRA is extremely excited about this new line of shafts that far exceeds performance and quality standards than we have ever reached previously.
Whether a golfer is a Tour caliber player or a weekend warrior, the ACCRA CS1 can be custom fit to your specific swing characteristics by a professional club fitter to maximize their launch conditions.

 

Andrew Hodson

Andrew is proud to sit on the National Fitters Board with Callaway Golf and has been proudly designated as one of the top 100 fitting centers by Golf Digest ever since this prestigious designation began back in 2010.

  • Artificial Turf

  • Private Fittings

  • Real Grass

  • Family Owned

  • Outdoor Facilty

  • Indoor facility

Need a club fitting or repair?

Get Fitted and fixed

Hodson Golf has decades of experience with custom club fitting and repair. If you're ready to get started, click the button below to request an appointment. Have questions? Give us a call!

cta-golf-1